EasyManua.ls Logo

NETGEAR FVS318N

NETGEAR FVS318N
359 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Monitor System Access and Performance
306
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
NAT (IPv4 only) The NAT state can be either Enabled or Disabled, depending on whether or not NAT is
enabled (see Network Address Translation on page 31) or classical routing is enabled
(see Classical Routing on p
age 31).
IPv4 Connection Type The connection type can be Static IP, DHCP, PPPoE, or PPTP, depending on whether
the WAN address is obtained dynamically through a DHCP server or assigned
statically by you. For information about connection types, see Configure the IPv4
Internet Connection on
page 24.
IPv6 Connection Type The connection type can be Static IPv6 or Dynamic IP (DHCPv6), depending on
whether the WAN address is obtained dynamically through a DHCP server or
assigned statically by you. For information about connection types, see Configure the
IPv6 Internet Connection o
n page 32.
IPv4 Connection State The IPv4 connection state can be either Connected or Not Connected, depending on
whe
ther or not the WAN interface is connected to the Internet over an IPv4 address.
For information about configuring the IPv4 address of the WAN port, see Configure the
IPv4 Internet Connection o
n page 24.
IPv6 Connection State The IPv6 connection state can be either Connected or Not Connected, depending on
whether or not the WAN interface is connected to the Internet over an IPv6 address.
For information about configuring the IPv6 address of the WAN port, see Configure the
IPv6 Internet Connection o
n page 32.
Link State The link state can be either LINK UP or LINK DOWN, depending on whether or not the
WAN port is physically connected to a modem or router. For information about
connecting a WAN port, see the ProSafe Wireless-N 8-Port Gigabit VPN Firewall
FVS318N Installation Manual.
WAN Mode This is a fixed field that states:
Use only single WAN port: Dedicated WAN.
Gateway The IP address of the gateway.
These IPv4 settings are either obtained
d
ynamically from your ISP or specified
by you on the Broadband ISP Settings
(IPv4) screen (see Manually Configure
an IPv4 Internet Connection on
page 27).
Primary DNS Server The IP address of the primary DNS server.
Secondary DNS Server The IP address of the secondary DNS
server
.
Gateway (IPv6) The IP address of the gateway.
These IPv6 settings are either obtained
d
ynamically from your ISP or specified
by you on the Broadband ISP Settings
(IPv6) screen (see Manually Configure
an IPv6 Internet Connection on
page 34).
Primary DNS Server
(IPv6)
The IP address of the primary DNS server.
Secondary DNS Server
(IPv6)
The IP address of the secondary DNS
server
.
Table 77. Detailed Status screen information (continued)
Item Description

Table of Contents

Other manuals for NETGEAR FVS318N

Related product manuals