EasyManua.ls Logo

NETGEAR FVS318N

NETGEAR FVS318N
359 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Monitor System Access and Performance
305
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
The following table explains the fields of the Detailed Status screen:
Table 77. Detailed Status screen information
Item Description
LAN Port Configuration
The following fields are shown for each of the LAN ports.
VLAN Profile The name of the VLAN profile that you assigned to this port on the LAN Setup screen
(see Assign and Manage VLAN Profiles on
page 48). If the VLAN is not enabled on
this port, the default profile (with VLAN ID 1) is assigned automatically.
VLAN ID The VLAN ID that you assigned to this port on the Add VLAN Profile screen (see
Configure a VLAN Profile on
page 51). If the default VLAN profile is used, the VLAN ID
is 1, which means that all tagged and untagged traffic can pass on this port.
MAC Address The MAC address for this port.
Note: All LAN ports that are part of the defaul
t VLAN share the same MAC address
unless you have specified that each VLAN needs to be assigned a unique MAC
address (see Configure VLAN MAC Addresses and LAN Advanced Settings on
page 56).
Note: LAN ports that have an IPv4 address that
differs from the default VLAN can
share the same MAC address as the default VLAN.
Note: LAN port 8 can be assigned as the DMZ port, in which case its VLAN ID is 4094.
F
or information about configuring the DMZ port, see Configure and Enable the DMZ
Port for IPv4 Traffic on page 72.
IP Address The IP address for this port. If the port is p
art of the default VLAN, the IP address is the
default LAN IP address (192.168.1.1). For information about configuring VLAN
profiles, see Configure a VLAN Profile on page 51.
Subnet Mask The subnet mask for this port. If the port is p
art of the default VLAN, the subnet mask
is the default LAN IP subnet mask (255.255.255.0). For information about configuring
VLAN profiles, see Configure a VLAN Profile on page 51.
DHCP Status The status of the IPv4 DHCP server for the VLAN (Enabled or Disabled). For
i
nformation about enabling DHCP for VLANs, see Configure a VLAN Profile on
page 51.
WAN Configuration
MAC Address The default MAC address for the port or the
MAC address that you have specified on
the Broadband Advanced Options screen for the port. For information about
configuring the MAC address, see Configure Advanced WAN Options and Other T
asks
on page 43.
IP Address The IPv4 address and subnet mask of the WAN p
ort. For information about configuring
the IPv4 address of the WAN port, see Configure the IPv4 Internet Connection on
page 24.
IPv6 Address The IPv6 address of the WAN port. For information
about configuring the IPv4 address
of the WAN port, see Configure the IPv6 Internet Connection on
page 32.
WAN State The WAN state can be either UP or DOWN, dep
ending on whether or not the port is
connected to the Internet.

Table of Contents

Other manuals for NETGEAR FVS318N

Related product manuals