NETGEAR FVS318N

IPv4 Firewall Protection
123
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
do so by adding outbound service rules (see LAN DMZ Outbound Service Rules on
page 124).
To access the LAN DMZ Rules screen and to make changes to an existing outbound or
inbound service rule, select Security > Firewall > LAN DMZ Rules. The LAN DMZ Rules
screen displays:
Figure 60.
In the Action column to the right of to the rule, click one of the following table buttons:
• Up. Mo
ves the rule up one position in the table rank.
• Down.
Moves the rule down one position in the table rank.
• Edit. Allows yo
u to make any changes to the rule definition of an existing rule. Depending
on your selection, either the Edit LAN DMZ Outbound Service screen (identical to
Figure 61 on
page 124) or the Edit LAN DMZ Inbound Service screen (identical to
Figure 62 on
page 125) displays, containing the data for the selected rule.
 To enable, disable, or delete one or more rules:
1. Select
the check box to the left of each rule that you want to enable, disable, or delete,
or click the Select All table button to select all rules.
2. Click one of the following t
able buttons:
• Enable. En
ables the rule or rules. The ! status icon changes from a gray circle to a
green circle, indicating that the selected rule or rules are enabled. (By default, when a
rule is added to the table, it is automatically enabled.)
• Disabl
e. Disables the rule or rules. The ! status icon changes from a green circle to a
gray circle, indicating that the selected rule or rules are disabled.
• Delete. Deletes the sele
cted rule or rules.