NETGEAR FVS318N

IPv4 Firewall Protection
150
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
2. Enter the settings as explained in the following table:
3. Click the Add t
able button. The new IP/MAC rule is added to the IP/MAC Bindings table.
4. Click Apply
to save your changes.
 To edit an IP/MAC binding:
1. In the I
P/MAC Bindings table, click the Edit table button to the right of the IP/MAC
binding that you want to edit. The Edit IP/MAC Binding screen displays.
2. Modif
y the settings that you wish to change (see the previous table).
3. Click Apply
to save your changes. The modified IP/MAC binding displays in the IP/MAC
Bindings table.
 To remove one or more IP/MAC bindings from the table:
1. Select
the check box to the left of each IP/MAC binding that you want to delete, or click
the Select All table button to select all bindings.
2. Click the Delete t
able button.
Table 33. IP/MAC Binding screen settings
Setting Description
Email IP/MAC Violations
Do you want to
enable E-mail Logs
for IP/MAC Binding
Violation?
Select one of the following radio buttons:
• Yes. IP/MAC binding violations are emailed.
• No.
IP/MAC binding violations are not emailed.
Note: Click the Firewall Logs & E-mail page link to ensure that emailing of logs is
enabled on the Firewall Logs & E-mail screen (see Configure Logging, Alerts, and
Event Notifications on
page 293).
IP/MAC Bindings
Name A descriptive name of the binding for identification and management purposes.
MAC Address The MAC address of the PC or device that is bound to the IP address.
IP Address The IP address of the PC or device that is bound to the MAC address.
Log Dropped
Packets
To log the dropped packets, select Enable from the drop-down list. The default setting
is Disable.