Virtual Private Networking Using IPv4 IPSec and L2TP Connections
161
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Use the VPN Wizard to Configure the Gateway for a Client Tunnel
To set up a client-to-gateway VPN tunnel using the VPN Wizard:
1. Select VPN > IPSec VPN
> VPN Wizard. The VPN Wizard screen displays. (The
following figure contains an example.)
Figure 88.
To display the wizard default settings, click the VPN Wizard default values option arrow
in the upper right of the screen. A pop-up screen displays (see Figure 84 on p
age 158),
showing the wizard default values. After you have comple
ted the wizard, you can modify
these settings for the tunnel policy that you have set up.
To Next Page
Loading...
