NETGEAR FVS318N

Virtual Private Networking Using IPv4 IPSec and L2TP Connections
164
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Note: Perform these tasks from a PC that has the NETGEAR ProSafe
VPN Client installed.
 To use the Configuration Wizard to set up a VPN connection between the VPN client
and the wireless VPN firewall:
1. Right-click th
e VPN client icon in your Windows system tray, and select Configuration
Panel. The Configuration Panel screen displays.
Figure 90.
1. From the main menu on the Configuration Panel screen, select Configuration > Wizard.
The Choice of the remote equipment wizard screen (screen 1 of 3) displays.