Virtual Private Networking Using IPv4 IPSec and L2TP Connections
166
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
4. Click Next. The Configuration Summary wizard screen (screen 3 of 3) displays.
Figure 93.
5. This screen is a summary screen of the new VPN configuration. Click Finish.
6. S
pecify the local and remote IDs:
a. In the
tree list pane of the Configuration Panel screen, click Gateway (the default
name given to the authentication phase). The Authentication pane displays in the
Configuration Panel screen, with the Authentication tab selected by default.
b. Click the
Advanced tab in the Authentication pane. The Advanced pane displays.
Figure 94.
To Next Page
Loading...
