Virtual Private Networking Using IPv4 IPSec and L2TP Connections
169
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Configure the Authentication Settings (Phase 1 Settings)
To create new authentication settings:
1. Right-click the VPN client icon
in your Windows system tray, and select Configuration
Panel. The Configuration Panel screen displays.
Figure 96.
2. In the tree list pane of the Configuration Panel screen, right-click VPN Configuration, and
select New Phase 1.
Figure 97.
3. Change the name of the authentication phase (the default is Gateway):
a. R
ight-click the authentication phase name.
b. Select Rename.
c. T
ype vpn_client.
d. Click anywh
ere in the tree list pane.
To Next Page
Loading...
