NETGEAR FVS318N

Internet and Broadband Settings
22
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
The web management interface menu consists of the following components:
• 1st level: Main navigation menu links. The main navigation menu in the orange bar
across the top of the web management interface provides access to all the configuration
functions of the wireless VPN firewall, and remains constant. When you select a main
navigation menu link, the letters are displayed in white against an orange background.
• 2n
d level: Configuration menu links. The configuration menu links in the gray bar
(immediately below the main navigation menu bar) change according to the main
navigation menu link that you select. When you select a configuration menu link, the
letters are displayed in white against a gray background.
• 3
rd level: Submenu tabs. Each configuration menu item has one or more submenu tabs
that are listed below the gray menu bar. When you select a submenu tab, the text is
displayed in white against a blue background.
• Option
arrows. If there are additional screens for the submenu item, links to the screens
display on the right side in blue letters against a white background, preceded by a white
arrow in a blue circle.
The bottom of each screen provides action buttons. The nature of the screen determines
which action b
uttons are shown. The following figure shows an example:
Figure 7.
Any of the following action buttons might display onscreen (this list might not be complete):
• Apply. Save and
apply the configuration.
• Rese
t. Reset the configuration to default values.
• T
est. Test the configuration before you decide whether or not to save and apply the
configuration.
• Auto Detect. Enable the
wireless VPN firewall to detect the configuration automatically
and suggest values for the configuration.
• Next.
Go to the next screen (for wizards).
• Back. Go
to the previous screen (for wizards).
• Canc
el. Cancel the operation.
When a screen includes a table, table buttons display to
let you configure the table entries.
The nature of the screen determines which table buttons are shown. The following figure
shows an example:
Figure 8.
Any of the following table buttons might display onscreen:
• Sele
ct All. Select all entries in the table.
• Delete. Delet
e the selected entry or entries from the table.