NETGEAR FVS318N

Manage Users, Authentication, and VPN Certificates
256
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
2. Under the List of Users table, click the Add table button. The Add User screen displays:
Figure 150.
3. Enter the settings as explained in the following table:
Table 65. Add Users screen settings
Setting Description
User Name A descriptive (alphanumeric) name of the user for identification and management
purposes.
User Type From the drop-down list, select one of the
predefined user types that determines the
access credentials:
• Ad
ministrator. User who has full access and the capacity to change the wireless
VPN firewall configuration (that is, read/write access).
• SSL VP
N User. User who can log in only to the SSL VPN portal.
• Gu
est User. User who can only view the wireless VPN firewall configuration (that is,
read-only access).
• IPSEC VPN User. A u
ser who can make an IPSec VPN connection only through a
NETGEAR ProSafe VPN Client, and only when the XAUTH feature is enabled (see
Configure Extended Authentication (XAUTH) on p
age 194).
• L2TP User. User who can connect over an L2TP connection to an L2TP client that
is located behind the wireless VPN firewall.
Select Group The drop-down list shows the groups that are listed on
the Group screen. From the
drop-down list, select the group to which the user is assigned. For information about
how to configure groups, see Configure Groups on p
age 251.
Note: The user is assigned to the domain that is associated with the selected group.
Password The password that the user needs to enter to gain access to the wireless VPN firewall.
The p
assword needs to contain alphanumeric, hyphen (-), or underscore (_)
characters.