NETGEAR FVS318N

Network and System Management
280
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
2. Enter the settings as explained in the following table:
WARNING!
If you are remotely connected to the wireless VPN firewall and you
select the No radio button to disable secure HTTP management,
you and all other SSL VPN users are disconnected when you click
Apply.
3. Click Apply to save your changes.
When remote management is enabled, you need to use an SSL connection to access the
wireless
VPN firewall from the Internet. You need to enter https:// (not http://) and type the
wireless VPN firewall’s WAN IP address and port number in your browser. For example, if
Table 69. Remote Management screen settings
Setting Description
Secure HTTP Management
Allow Secure HTTP
Man
agement?
To enable secure HTTP management, select the Yes radio button, which is the
default setting. To disable secure HTTP management, select the No radio button.
Specify the addresses through which access is allowed by selecting one of the
follo
wing radio buttons:
• Ever
yone. There are no IP address restrictions.
• IP ad
dress range. Only users who use devices in the specified IP address range
can securely manage over an HTTP connection. In the From fields, type the start IP
address of the range; in the To fields, type the end IP address of the range.
• Onl
y this PC. Only a user who uses the device with the specified IP address can
securely manage over an HTTP connection. Type the IP address in the fields.
Port Number Enter the port number through which access is allowed. The default
p
ort number is 443.
Note: The URL through which you can securely manage over an
H
TTP connection displays below the Port Number field.
Telnet Management
Allow Telnet
Man
agement?
To enable Telnet management, select the Yes radio button. To disable Telnet
management, select the No radio button, which is the default setting.
Specify the addresses through which access is allowed by selecting one of the
following radio buttons:
• Ever
yone. There are no IP address restrictions.
• IP ad
dress range. Only users who use devices in the specified IP address range
can manage over a Telnet connection. In the From fields, type the start IP address
of the range; in the To fields, type the end IP address of the range.
• Onl
y this PC. Only a user who uses the device with the specified IP address can
manage over a Telnet connection. Type the IP address in the fields.