NETGEAR FVS318N

Monitor System Access and Performance
315
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
drop-down list in the Add Known PCs and Devices section or on the Edit Groups and
Hosts screen.
• Action. Th
e Edit table button, which provides access to the Edit Groups and Hosts
screen.
Note: If the wireless VPN firewall is rebooted, the data in the Known PCs
and Devices table is lost until the wireless VPN firewall rediscovers
the devices.
View the DHCP Log
 To review the most recent entries in the DHCP log:
1. Select Network Configuratio
n > LAN Settings > LAN Setup (IPv4). The LAN Setup
(IPv4) screen displays (see Figure 27 on p
age 51).
2. Click the DHCP Log optio
n arrow at the upper right of the LAN Setup (IPv4) screen. The
DHCP Log displays in a pop-up screen:
Figure 183.
To view the most recent entries, click Refresh Log. To delete all the existing log entries,
click Clear Log. Click the LAN Setup option arrow in the upper right to display the LAN
Setup (IPv4) screen, from which you can modify the DHCP settings (see Configure a
VLAN Profile o
n page 51).