NETGEAR FVS318N

LAN Configuration
58
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
• Primary LAN IP address. 192.168.1.1 with subnet 255.255.255.0
• Secondary LAN IP add
ress. 192.168.20.1 with subnet 255.255.255.0
 To add a secondary LAN IP address:
1. Select Netwo
rk Configuration > LAN Settings > LAN Multi-homing (IPv4). The LAN
Multi-homing (IPv4) screen displays. (The following figure contains one example.)
Figure 30.
The Available Secondary LAN IPs table displays the secondary LAN IP addresses added
to the wireless VPN firewall.
2. In
the Add Secondary LAN IP Address section of the screen, enter the following settings:
• IP Address. Enter th
e secondary address that you want to assign to the LAN ports.
• Subne
t Mask. Enter the subnet mask for the secondary IP address.
3. Click the Add t
able button in the rightmost column to add the secondary IP address to the
Available Secondary LAN IPs table.
Repeat step 2 and step 3 for each secondary IP address that you want to add to the
Available Secondary LAN IPs table.
Note: Secondary IP addresses cannot be configured in the DHCP server.
The hosts on the secondary subnets need to be manually configured
with the IP addresses, gateway IP address, and DNS server IP
addresses.
 To edit a secondary LAN IP address:
1. On
the LAN Multi-homing (IPv4) screen (see the previous screen), click the Edit button
in the Action column for the secondary IP address that you want to modify. The Edit LAN
Multi-homing screen displays.
2. Modif
y the IP address or subnet mask, or both.
3. Click Apply to save
your settings.