NETGEAR FVS318N - Page 75

LAN Configuration
75
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
3. Click Apply to save your settings.
Note: The DMZ LED next to LAN port 8 (see Front Panel on page 14)
lights green to indicate that the DMZ port is enabled.
For information about how to define the DMZ WAN rules and LAN DMZ rules, see Create
DMZ WAN Rules on
page 119 and Create LAN DMZ Rules on page 122, respectively.
Enable LDAP
information
To enable the DHCP server to provide Lightweight Directory Access Protocol
(LDAP) server information, select the Enable LDAP information check box. Enter
the following settings.
LDAP Server The IP address or name of the LDAP server.
Search Base The search objects that specify the location in the directory tree
from which the LDAP search begins. You can specify multiple
search objects, separated by commas. The search objects
include:
• CN (for common name)
• OU (for organizational unit)
• O (for organization)
• C (for country)
• DC (for domain)
For example, to search the Netgear.net domain for all last
na
mes of Johnson, you would enter:
cn=Johnson,dc=Netgear,dc=net
Port The port number for the LDAP server. The default setting is 0
(zero).
DNS Proxy
Enable DNS Proxy This setting is optional. To enable the wireless VPN firewall to provide a LAN IP
address for DNS address name resolution, select the Enable DNS Proxy check
box. This check box is selected by default.
Note: When the DNS Proxy option is disabled,
all DHCP clients receive the DNS
IP addresses of the ISP but without the DNS proxy IP address.
Table 16. DMZ Setup screen settings (continued)
Setting Description