NETGEAR FVS318N

LAN Configuration
83
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
4. Click Apply to save your settings. The new static route is added to the List of IPv6 Static
Routes table.
 To edit an IPv6 static route:
1. On the
IPv6 Static Routing screen (see Figure 42 on page 82), click the Edit button in
the Action column for the route that you want to
modify. The Edit Static Route screen
displays. This screen is identical to the Add Static Route screen.
2. Mo
dify the settings as explained in the previous table.
3. Click App
ly to save your settings.
 To delete one or more routes:
1. On the
IPv6 Static Routing screen (see Figure 42 on page 82), select the check box to
the left of each route that you want to delete, or click the Select All t
able button to
select all routes.
2. Click the Del
ete table button.
Interface From the drop-down list, select the physical or virtual network interface (WAN1,
sit0 Tunnel, or LAN) through which the route is accessible.
IPv6 Gateway The gateway IPv6 address through which the destination host or network can be
reached.
Metric The priority of the route. Select a value between 2 and 15. If multiple routes to the
same destination exist, the route with the lowest metric is used.
Table 19. Add Static Route screen settings (continued)
Setting Description