NETGEAR FVS318N

Wireless Configuration and Security
96
ProSafe Wireless-N 8-Port Gigabit VPN Firewall FVS318N
Encryption
Note: WPA, WPA2, and
WPA
+WPA2 only.
The encryption that you can select depends
on the type of WPA security that
you have selected:
• WP
A. You can select the following encryption from the drop-down list:
- TKIP
- TKIP+CCMP
• WP
A2. You can select the following encryption from the drop-down list:
- CCMP
- TKIP+CCMP
• WP
A+WPA2. The encryption is TKIP+CCMP.
Authentication
Note: WPA, WPA2, and
WPA
+WPA2 only.
For WPA, WPA2, and WPA+WPA2 only, specify the a
uthentication by making a
selection from the drop-down list:
• PS
K
• RADIUS
• PSK
+RADIUS
WPA Password
Note: WPA, WPA2, and
WPA
+WPA2 only.
For WPA, WPA2, and WPA+WPA2 only
, if you have selected PSK or
PSK+RADIUS authentication, enter a pre-shared key or password.
Enable
Pre-Authentication
Note: WPA2 only.
For WPA2 only, if you have selected RADIUS
authentication, configure
preauthentication by selecting the check box. Preauthentication allows a client
to roam from one access point to another access point without having to be
reauthenticated.
Radius Server Settings
Note: WPA, WPA2, and
WPA
+WPA2 only.
For WPA, WPA2, and WPA+WPA2 only, if you have selected RADIUS or
PSK+RADIUS authentication, click the Radius Server Settings link to
configure the RADIUS settings (see RADIUS Client Configuration on
page 196).
WEP Index and Keys
Authentication Specify the authentication by making a selectio
n from the drop-down list:
• Op
en System. Select this option to use WEP encryption without
authentication.
• Shared Key. Select this o
ption to use WEP authentication and encryption
with a shared key (passphrase).
Encryption Select the encryption key size by making
a selection from the drop-down list:
• 64-bit WEP. Standard WEP encryption, using 40/64-bit encryption.
• 128
-bit WEP. Standard WEP encryption, using 104/128-bit encryption.
Passphrase Enter a passphrase. The passphrase length needs to be between 8 and
63 characters (inclusive). The secret passphra
se allows you to automatically
generate the keys by clicking Generate.
Table 22. Add Profile screen settings (continued)
Field Description