GS716Tv2 and GS724Tv3 Software Administration Manual
3-44 Configuring Switching Information
v1.0, July 2009
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
4. If you configure an IGMP snooping querier, click Apply to apply the new settings to the
switch. Configuration changes take effect immediately.
IGMP Snooping Querier VLAN Configuration
Use this page to configure IGMP queriers for use with VLANs on the network.
To access this page:
1. Click Switching Multicast IGMP Snooping Querier Querier VLAN Configuration
in the navigation tree.
Figure 3-28
Table 3-26. IGMP Snooping Querier VLAN Configuration Fields
Field Description
VLAN ID Specifies VLAN ID for which the IGMP Snooping Querier is to be
enabled. Select New Entry to create a new VLAN ID for IGMP
Snooping. You can also set pre-configurable Snooping Querier
parameters.
To Next Page
Loading...
