NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch

GS716Tv2 and GS724Tv3 Software Administration Manual
7-12 Maintenance
v1.0, July 2009
6. Click Cancel to cancel the operation on the screen and reset the data on the screen to the latest
value of the switch.
7. Click Apply to update the image description on the switch.
Viewing the Dual Image Status
You can use the Dual Image Status page to view information about the system images on the
device.
To display the Dual Image Status page:
1. Click Maintenance File Management  Dual Image  Dual Image Status in the
navigation menu.
Figure 7-7
Table 7-5. Dual Image Status Fields
Field Description
Unit The unit ID of the switch is always 1.
Image1 Ver Displays the version of the image1 code file.
Image2 Ver Displays the version of the image2 code file.
Current-active Displays the currently active image on this switch.
Next-active Displays the image to be used on the next restart of this switch.
Image1 Description Displays the description associated with the image1 code file.