GS716Tv2 and GS724Tv3 Software Administration Manual
1-8 Getting Started
v1.0, July 2009
2. Enter the following values into the appropriate places in the form:
• Product Assigned Firmware. The location of the new firmware. If you do not know the
location, you can click Browse to locate the file.
• Upgrade Password. Enter your password, then click Apply; the default password is
‘password’.
• Start Upgrade. Shows upgrading in progress.
3. Click Start to begin loading the upgrade. The system software is automatically loaded. When
the process is complete, the switch automatically reboots.
Exit
Click Exit from the Switch Setting section to close the SmartWizard Discovery utility.
Figure 1-5
Note: It is important that you do not power-off the PC or the Switch while the Firmware
upgrade is in progress.
To Next Page
Loading...
