GS716Tv2 and GS724Tv3 Software Administration Manual
1-4 Getting Started
v1.0, July 2009
Use your Web browser to manage your switch. The default password is password. Then use
this page to proceed to management of the switch covered in “Using the Web Interface” on
page 1-9.
SmartWizard Discovery in a Network without a DHCP Server
This section describes how to set up your switch in a network without a DHCP server, and is
divided into the following tasks:
• “Manually Assigning Network Parameters” on page 1-5
• “Configuring the Network Settings on the Administrative System” on page 1-6
Figure 1-2
To Next Page
Loading...
