GS716Tv2 and GS724Tv3 Software Administration Manual
Configuring Switching Information 3-7
v1.0, July 2009
2. Click Add to update the switch with the values on this screen.
3. To remove a configured LAG (port channel), select it and click Delete. All ports that were
members of this LAG are removed from the LAG and included in the default VLAN.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
5. If you make any changes to this page, click Apply to send the updated configuration to the
switch. Configuration changes take effect immediately.
LAG Membership
Use the LAG Membership page to group one or more full-duplex Ethernet links to be aggregated
together to form a link aggregation group (LAG), which is also known as a port-channel. The
switch can treat the port-channel as if it were a single link.
To access the LAG Membership page:
1. Click Switching LAG Basic LAG Membership in the navigation tree.
Figure 3-4
Table 3-4. LAG Membership Fields
Field Description
LAG ID Identifies the LAG (port channel) with the interface naming convention.
LAG Name Enter the name you want assigned to the LAG. You may enter any
string of up to 15 alphanumeric characters. A valid name has to be
specified to create the LAG.
To Next Page
Loading...
