GS716Tv2 and GS724Tv3 Software Administration Manual
3-34 Configuring Switching Information
v1.0, July 2009
2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
3. If you make any configuration changes, click Apply to apply the new settings to the switch.
Configuration changes take effect immediately.
IGMP Snooping Interface Configuration
Use the IGMP Snooping Interface Configuration page to configure IGMP snooping settings on
specific interfaces.
To access the IGMP Snooping Interface Configuration page:
1. Click Switching Multicast IGMP Snooping IGMP Snooping Interface
Configuration in the navigation tree.
Figure 3-22
Table 3-20. IGMP Snooping Interface Configuration Fields
Field Description
Interface Lists all physical, VLAN, and LAG interfaces. Select the interface you
want to configure.
Admin Mode Select the interface mode for the selected interface for IGMP Snooping
for the switch from the menu. The default is Disable.
To Next Page
Loading...
