GS716Tv2 and GS724Tv3 Software Administration Manual
Managing Device Security 5-19
v1.0, July 2009
2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
3. If you change any of the settings on the page, click Apply to send the updated configuration to
the switch. Configuration changes take effect immediately.
Access Profile Configuration
Use the Access Profile Configuration page to configure settings that control management access to
the switch.
To access the Access Profile Configuration page:
Table 5-13. Certificate Download Fields
Field Description
File Type Select the type of SSL certificate to download, which can be one of the
following:
• SSL Trusted Root Certificate PEM File: SSL Trusted Root
Certificate File (PEM Encoded).
• SSL Server Certificate PEM File: SSL Server Certificate File (PEM
Encoded).
• SSL DH Weak Encryption Parameter PEM File: SSL Diffie-Hellman
Weak Encryption Parameter File (PEM Encoded).
• SSL DH Strong Encryption Parameter PEM File: SSL Diffie-
Hellman Strong Encryption Parameter File (PEM Encoded).
TFTP Server IP Enter the IP address of the TFTP server in the form of an IP address in
x.x.x.x format. The factory default is 0.0.0.0. Make sure that the software
image or other file to be downloaded is available on the TFTP server.
Remote File Name Enter the name of the file to download. You may enter up to 32
characters. The factory default is blank.
To Next Page
Loading...
