GS716Tv2 and GS724Tv3 Software Administration Manual
xii
v1.0, July 2009
• Chapter 5, “Managing Device Security” on page 5-1 contains information about configuring
switch security information such as port access control, TACACS+, and RADIUS server
settings.
• Chapter 6, “Monitoring the System” on page 6-1 describes how to view a variety of
information about the switch and its port, and to configure how the switch monitors events.
• Chapter 7, “Maintenance” on page 7-1 describes features to help you manage the switch.
• Appendix A, “Hardware Specifications and Default Values” on page B-1 contains hardware
specifications and default values on the GS716T/GS724T switch.
• Appendix B, “Configuration Examples” on page B-1 contains examples of how to configure
various features on the GS716T/GS724T switch, such as VLAN and Access Control List
(ACL) configuration examples.
Note: Refer to the GS716T/GS724T Series Smart Switch for information about
issues and workarounds.
Conventions, Formats and Scope
The conventions, formats, and scope of this manual are described in the following paragraphs:
• Typographical Conventions. This manual uses the following typographical conventions:
Italic Emphasis, books, CDs, file and server names, extensions
Bold User input, IP addresses, GUI screen text
Fixed Command prompt, CLI text, code
italic URL links
• Formats. This manual uses the following formats to highlight special messages:
Note: A note provides more information about a feature or technology.
To Next Page
Loading...
