NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch

GS716Tv2 and GS724Tv3 Software Administration Manual
2-8 Configuring System Information
v1.0, July 2009
5. Click Refresh to refresh the page with the most current data from the switch.
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
SNTP Global Status
Use the SNTP Global Status page to view information about the system’s SNTP client.
To access the SNTP Global Status page:
1. Click System  Management  Time  SNTP Global Configuration in the navigation
menu.
Time Specifies the duration of the box in hours, minutes and seconds since
the last reboot.
Time Zone When using SNTP/NTP time servers to update the switch’s clock, the
time data received from the server is based on Coordinated Universal
Time (UTC), which is the same as Greenwich Mean Time (GMT). This
may not be the time zone in which the switch is located. Time Zone
configures a time zone specifying the time difference from UTC time
zone. The time zone can affect the display of the current system time.
The default value is UTC 00:00.
Figure 2-4
Table 2-3. Time Configuration Fields (continued)
Field Description