GS716Tv2 and GS724Tv3 Software Administration Manual
7-2 Maintenance
v1.0, July 2009
1. Click Maintenance Reset Device Reboot in the navigation tree.
2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
3. Click Apply to send the updated configuration to the switch. Configuration changes take place
immediately.
Reset Configuration to Defaults
Use the Factory Default page to reset the system configuration to the factory default values.
To access the Factory Defaults page:
Figure 7-1
Note: For information about configuring network information, see “Connecting the
Switch to the Network” on page 1-1.
To Next Page
Loading...
