GS716Tv2 and GS724Tv3 Software Administration Manual
3-52 Configuring Switching Information
v1.0, July 2009
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
Static MAC Address
Use the Static MAC Address Configuration page to view static MAC addresses configured on an
interface.
To access the Static MAC Address Configuration page:
1. Click Switching Address Table Advanced Static MAC Address in the navigation tree.
2. Click Refresh to reload the page and display the latest MAC address learned on a specific
port.
3. Enter a new static MAC address in the field, select the VLAN ID corresponding to the MAC
address being added, then click Add to add the static MAC address to the switch.
Figure 3-33
Table 3-31. Static MAC Address Fields
Field Description
Vlan ID Select the VLAN ID corresponding to the MAC address being added.
Static MAC Address Only packets with source address matching this MAC Address will be
admitted, otherwise it will be discarded.
Interface Select the physical interface for which you want to display data.
To Next Page
Loading...
