NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch

GS716Tv2 and GS724Tv3 Software Administration Manual
2-10 Configuring System Information
v1.0, July 2009
2. Click Refresh to refresh the page with the most current data from the switch.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
4. If you change any of the settings on the page, click Apply to send the updated configuration to
the switch. Configuration changes take effect immediately.
SNTP Server Configuration
Use the SNTP Server Configuration page to view and modify information for adding and
modifying Simple Network Time Protocol SNTP servers.
To display the SNTP Server Configuration page:
1. Click System  Management  Time  SNTP Server Configuration in the navigation tree.
Unicast Sever Max Entries Specifies the maximum number of unicast server entries that can be
configured on this client.
Unicast Server Current
Entries
Specifies the number of current valid unicast server entries configured
for this client.
Figure 2-5
Table 2-4. SNTP Global Configuration Fields (continued)
Field Description