GS716Tv2 and GS724Tv3 Software Administration Manual
Managing Device Security 5-13
v1.0, July 2009
2. If you make changes to the page, or add a new entry, click Apply to apply the changes to the
system.
3. To delete a configured TACACS+ server, select the IP address of the server from the
TACACS+
Server IP Address drop down menu, and then click Delete.
Authentication List Configuration
Use the Authentication List page to configure the default login list. A login list specifies one or
more authentication methods to validate switch or port access for the admin user.
To access the Authentication List page:
1. Click Security Management Security, and then click the Authentication List link.
Note: Admin is the only user on the system and is assigned to a preconfigured list named
defaultList, which you cannot delete.
Figure 5-8
To Next Page
Loading...
