GS716Tv2 and GS724Tv3 Software Administration Manual
Configuring Switching Information 3-17
v1.0, July 2009
The Spanning Tree folder contains links to the following features:
• “STP Switch Configuration/Status” on page 3-17
• “CST Configuration” on page 3-19
• “CST Port Configuration” on page 3-21
• “CST Port Status” on page 3-23
• “Rapid STP Configuration” on page 3-24
• “MST Configuration” on page 3-26
• “MST Port Configuration” on page 3-27
• “STP Statistics” on page 3-31
STP Switch Configuration/Status
The Spanning Tree Switch Configuration/Status page contains fields for enabling STP on the
switch.
To display the Spanning Tree Switch Configuration/Status page:
1. Click SwitchingSTPBasic STP Configuration in the navigation tree.
Note: For two bridges to be in the same region, the force version should be 802.1s and
their configuration name, digest key, and revision level should match. For
additional information about regions and their effect on network topology, refer to
the IEEE
802.1Q standard.
To Next Page
Loading...
