NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch

GS716Tv2 and GS724Tv3 Software Administration Manual
A-2 Hardware Specifications and Default Values
v1.0, July 2009
GS7xxTR Gigabit Smart Switch Features and Defaults
Table A-3. Port Characteristics
Feature Sets Supported Default
Auto negotiation/static speed/
duplex
16 on GS716T/
24 on GS724T (per port)
Auto negotiation
Auto MDI/MDIX N/A Enabled
802.3x flow control/back
pressure
1 (per system) Disabled
Port mirroring 1 Disabled
Port trunking (aggregation) 6 Pre-configured
802.1D spanning tree 1 Disabled
802.1w RSTP 1 Disabled
802.1s spanning tree 3 instances Disabled
Static 802.1Q tagging 2 Port Trunking on GS716T/
4 Port Trunking on GS724T
VID = 1MemberPorts = [1–n]
n = 16 on GS716T
24 on GS724T
Learning process Supports Static and dynamic
MAC entries
Dynamic learning is enabled by
default
Table A-4. Quality Of Service
Feature Sets Supported Default
Number of queues 4 N/A
Port based N/A N/A
802.1p 1 Enabled
DSCP 1 Disabled
Rate limiting 16 on GS716T/
24 on GS724T (per port)
Disabled
Auto-QoS 16 on GS716T/
24 on GS724T (per port)
Disabled