GS716Tv2 and GS724Tv3 Software Administration Manual
Managing Device Security 5-35
v1.0, July 2009
2. Click Refresh to refresh the page with the most current data from the switch.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
4. If you make changes to the page, click Apply to apply the changes to the system.
Port Security Interface Configuration
A MAC address can be defined as allowable by one of two methods: dynamically or statically.
Both methods are used concurrently when a port is locked.
Figure 5-21
Table
5-24. Port Security Configuration Fields
Field Description
Port Security Mode Enable or Disable the port security feature.
Table 5-25. Port Security Violation Fields
Field Description
Port Identifies the port where a violation occurred.
Last Violation MAC Displays the source MAC address of the last packet that was discarded at a
locked port.
VLAN ID Displays the VLAN ID corresponding to the Last Violation MAC address.
To Next Page
Loading...
