NETGEAR GS724Tv3 - ProSafe Gigabit Managed Switch - Page 132

GS716Tv2 and GS724Tv3 Software Administration Manual
5-6 Managing Device Security
v1.0, July 2009
2. Click Refresh to update the page with the most current information.
3. To add a RADIUS server, enter information about the server into the appropriate fields and
click Add.
4. To delete a configured RADIUS server, select the check box next to the server address, and
then click Delete.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
6. If you make changes to the page, click Apply to apply the changes to the system.
Active Sets the selected server to the Primary or Secondary server.
Message Authenticator Enable or disable the message authenticator attribute for the selected
server.
Table 5-4. RADIUS Server Statistics Fields
Field Description
Server Address This displays all configured RADIUS servers.
Round Trip Time The time interval, in hundredths of a second, between the most recent
Access-Reply/Access-Challenge and the Access-Request that matched
it from this RADIUS authentication server.
Access Requests The number of RADIUS Access-Request packets sent to this server.
This number does not include retransmissions.
Access Retransmissions The number of RADIUS Access-Request packets retransmitted to this
server.
Access Accepts The number of RADIUS Access-Accept packets, including both valid
and invalid packets, that were received from this server.
Access Rejects The number of RADIUS Access-Reject packets, including both valid and
invalid packets, that were received from this server.
Access Challenges The number of RADIUS Access-Challenge packets, including both valid
and invalid packets, that were received from this server.
Malformed Access
Responses
The number of malformed RADIUS Access-Response packets received
from this server. Malformed packets include packets with an invalid
length. Bad authenticators or signature attributes or unknown types are
not included as malformed access-responses.
Table 5-3. RADIUS Server Configuration Fields (continued)
Field Description