GS716Tv2 and GS724Tv3 Software Administration Manual
5-46 Managing Device Security
v1.0, July 2009
1. Click Security ACL, then click the Basic Binding Table link.
2. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the
latest value of the switch.
3. To delete the binding, select the check box next to the interface and click Delete.
Figure 5-28
Table 5-33. MAC ACL Rule Configuration Fields
Field Description
Interface Shows the interface to which the MAC ACL is bound.
Direction Specifies the packet filtering direction for ACL. The only valid direction
is Inbound, which means the MAC ACL rules are applied to traffic
entering the port.
ACL Type Displays the type of ACL assigned to selected interface and direction.
ACL ID Displays the ACL Name identifying the ACL assigned to selected
interface and direction.
Sequence No Displays the Sequence Number signifying the order of specified ACL
relative to other ACLs assigned to selected interface and direction.
To Next Page
Loading...
