GS716Tv2 and GS724Tv3 Software Administration Manual
Configuring Switching Information 3-13
v1.0, July 2009
3. To change the VLAN tagging for one or more ports, click each port to make traffic forwarded
by the interface tagged (T) or untagged (U).
Figure 3-9
Table 3-8. VLAN Membership Configuration Fields
Field Description
VLAN ID Select the VLAN Identifier for which you want to display or configure
data.
Group Operation Use this field to select all the ports and configure them. Possible values
are:
• Untag All: Select all the ports on which all frames transmitted from
this VLAN will be untagged. All the ports will be included in the VLAN.
• Tag All: Select the ports on which all frames transmitted for this VLAN
will be tagged. All the ports will be included in the VLAN.
• Remove All: This selection has the effect of excluding all ports from
the selected VLAN.
VLAN Name This field identifies the name for the VLAN you selected. It can be up to
32 alphanumeric characters long, including blanks. The default is blank.
VLAN ID 1 is always named “Default.”
To Next Page
Loading...
