NETGEAR Nighthawk RS700 User Manual

•
C. 10G LAN port: An RJ-45 LAN port that supports speeds up to 10 Gbps. Use a
Category 6 (Cat6) Ethernet cable or higher rated Ethernet cable to connect the router
to a high-speed LAN server, LAN storage device, or another LAN device.
•
D. Ethernet LAN ports: Four Gigabit Ethernet RJ-45 LAN ports that support 1G,
100M, and 10M speed. Use these ports to connect Ethernet LAN devices to your
router.
The router supports port aggregation:
- LAN aggregation: Use Ethernet LAN ports 1 and 2 to set up a port aggregation
link to a LAN device that also supports Ethernet LAN port aggregation. For more
information, see Manage Ethernet LAN port aggregation to a LAN device on
page 113.
- Internet (WAN) aggregation: Use Ethernet LAN port 4 with the 10G Internet
port to set up a multi-gigabit Internet connection with port aggregation. For more
information, see Get multi-gigabit Internet with Internet port aggregation on
page 41.
You can set up both Internet (WAN) aggregation and LAN aggregation.
•
E. USB 3.0 port: Use the USB 3.0 port to connect a USB storage device to your
router.
•
F. 10G Internet port: An RJ-45 Internet port (marked with yellow) that supports
speeds up to 10 Gbps. Use a Category 6 (Cat6) Ethernet cable or higher rated
Ethernet cable to connect a high-speed modem for a high-speed Internet connection.
For more information, see About high-speed Internet connections and Internet port
aggregation on page 41.
•
G. DC power connector: Connect the power adapter that came in your product
package to the DC power connector.
User Manual20Hardware Setup
Nighthawk WiFi 7 Tri-Band Router Model RS700

NETGEAR Nighthawk RS700 Specifications

General

WiFi Speed	Up to 19 Gbps
USB Ports	1 x USB 3.0
Memory	1GB RAM
WiFi Technology	WiFi 7
Security	WPA3, VPN support
WiFi Bands	Tri-Band
Storage	512MB