NETGEAR Nighthawk RS700 User Manual

The Access Control page displays.
A table displays the detected device name, MAC address, and connection type of
the devices that are not connected and are blocked from accessing the network.
In the following steps, we refer to the list of blocked devices not currently connected
to the network as the list of blocked devices.
6.
To add a device to the list of blocked devices, do the following:
a.
Click the Add button.
The Add Blocked Device page displays.
b.
Enter the MAC address and device name for the device that you want to block.
c.
On the Add Blocked Device page, click the Apply button.
The device is added to the list of blocked devices.
7.
To remove a device from the list of blocked devices, do the following:
a.
Select the check box for the device.
b.
Click the Remove from the list button.
The device is removed from the list of blocked devices.
8.
To change the device status by allowing access for a device on the list of blocked
devices, do the following:
a.
Select the check box for the device.
b.
Click the Edit button.
The Edit Device Name page displays.
c.
From the Access Control menu, selected Allow.
d.
On the Edit Device Name page, click the Apply button.
The device is moved to the list of allowed devices not currently connected to the
network.
9.
To change the device name for a device on the list of blocked devices, do the
following:
a.
Select the check box for the device.
b.
Click the Edit button.
The Edit Device Name page displays.
c.
In the Device Name field, enter a name.
User Manual67Control Access to the Internet
Nighthawk WiFi 7 Tri-Band Router Model RS700

NETGEAR Nighthawk RS700 Specifications

General

WiFi Speed	Up to 19 Gbps
USB Ports	1 x USB 3.0
Memory	1GB RAM
WiFi Technology	WiFi 7
Security	WPA3, VPN support
WiFi Bands	Tri-Band
Storage	512MB