12Getting Started
Tap on an empty space in The Grid to create a new Virtual Device
Block.
Tap on a block to access its parameters. You can either use the
touch controls on the screen or the footswitches to modify the
parameters.
Drag-and-drop a block anywhere on The Grid. Drag a block to the
upper-right corner to remove it.
Double-tap a block to bypass/activate it.
x2
Tap on a parameter value to ne control. Write a value with the
numeric keyboard and tap to change it. This also works in
the I/O Settings menu.
50
GAIN
When a block menu is open, turn the top-right footswitch clockwise
or counterclockwise to navigate through the virtual devices or
Neural Captures within the same category without opening the
Virtual Devices Library.
Turning the top-right footswitch also changes the position of the
caret in any text eld.
1
In
1/2
Out
Remove
New PresetA1
For more details, check the
Working on The Grid section.
To Next Page
Loading...