13Getting Started
Tap and hold on an empty space on The Grid to create a Splitter/
Mixer path.
If you move any block vertically in The Grid a Splitter/Mixer path will
be created automatically.
1/2
Out
1
In
1/2
Out
1
In
Tap on the Input and Output blocks to assign them to physical
ports, USB I/Os, and Rows in The Grid.
1/2
Out
1/2
Out
1
In
These controls can be assigned to Scenes and Expression Pedals.
Color strips display on the Output block when MUTE and/or SOLO
are activated.
Tap and hold an Output block to access the Lane Output Control
menu�
1
In
Tap and hold on an Input block to access the Input Gate Control
menu�
These controls can be assigned to Scenes and Expression Pedals. A
color strip displays on the input block when the GAIN REDUCTION
is activated.
To Next Page
Loading...