Neve 8424 - Services Screen; Master, Talkback, Oscillator, and System Options

39
Services 1
The 8424 Services screen allows users to globally select master controls,
engage Talkback and reverse talkback options controls and access and assign
the oscillator functions.
The services screen is a 16-character digital display that shows the top menu
titles MAST, TALK, OSC, SYSTEM. The buttons allow access to each control.
- Returns to the top title menu.
- Scrolls forwards through menu options one at a time.
- Scrolls backwards through menu options one at a time.
- Enters the four main menu tabs and activates selected parameters.
CTRL - Enables secondary functions. Pressing CTRL + will jump to
the beginning or end of the selected menu options.
Master Options 1
MIX – Globally routes channels to the stereo mix bus.
MIX PAN – Globally activates channel PANS.
GRP 1 – Globally routes channels to group 1.
GRP 2 – Globally routes channels to group 2.
GRP 3 – Globally routes channels to group 3.
GRP 4 – Globally routes channels to group 4.
ZERO IP A – Globally resets all channel Input A DAW Interface outputs to
unity gain.
ZERO IP B - Globally resets all channel Input B Line Inputs to unity gain.
SOLO: [LATCH]/[MOM]– Switches the console solo system from latch to
momentary. Console default is LATCH
ILM: [Y]/[N] – IN Line Mode – Globally selects Input A to return on console
Input C via the ST CUE controls.
See page 54 for more information on In line Monitoring.
INS IN – Globally activates channel inserts.
INS I/P C – Globally assigns channel inserts to Input C.
CUE PAN – Globally activates channel ST Cue Pans.
GRP PAN – Globally activates channel Pan to Groups.
DIR PRE – Globally routes channel Direct Outputs as pre-fader.
CUE GRP – Globally routes channel Cue stereo outputs to group 3&4.
GRP 1 PRE [Y]/[N] – Routes Group 1 Direct Output pre-fader.
GRP 2 PRE [Y]/[N] – Routes Group 2 Direct Output pre-fader.
GRP 3 PRE [Y]/[N] – Routes Group 3 Direct Output pre-fader.
GRP 4 PRE [Y]/[N] – Routes Group 4 Direct Output pre-fader.
IPA>DIR [Y]/[N] – Routes channel 1-24 Direct Output from the Input A DAW
Interface outputs. This is useful for printing stem tracks back into the DAW.
The default channel Direct Output is Input B.