NF ZM2376 - 4. ADVANCED OPERATIONS; 4.1 Measuring with Specific Voltage or Current (ALC)

4-1 ZM2376
4． ADVANCED OPERATIONS
4． ADVANCED OPERATIONS ............................................. 4-1
4.1 Measuring with Specific Voltage or Current (ALC) ............. 4-2
4.2 Restricting the Variation of Measured Value (Averaging) ... 4-6
4.3 Displaying the Deviation from the Reference Value ........... 4-7
4.4 Sorting the Part (Comparator) ......................................... 4-10
4.5 Connecting to the Part handler (Handler Interface) .......... 4-21
4.6 Measuring with More Than One Condition
(Multi-measurement) ...................................................... 4-30
4.7 Changing the Contents Displayed on the Second Line of
Measurement Screen (Auxiliary Display) ........................ 4-37
4.8 Saving/Recalling the Setting and Correction Value into the
Memory .......................................................................... 4-39
4.9 Setting the Contact Check ............................................... 4-41
4.10 Applying the DC Bias Voltage ........................................ 4-44
4.11 Applying the DC Bias Current ........................................ 4-51
4.12 Disabling the Key-Operation of Panel ............................ 4-54
4.13 Changing the Settling Wait Time During Automatic
Adjustment ..................................................................... 4-55
4.14 Initializing of All Settings ................................................ 4-56
4.15 Self-Diagnosis ............................................................... 4-59
4.16 Checking the Version ..................................................... 4-60
4.17 Remote Control ............................................................. 4-61
4.18 Switching the Operation Mode (alternative command) ... 4-62