NF ZM2376 - 4.8 Saving;Recalling the Setting and Correction Value

4.8 Saving/Recalling the Setting and Correction Value
4-39 ZM2376
4.8 Saving/Recalling the Setting and Correction Value
ZM2376 saves/recalls the setting and correction value up to 32-set.
 Saving the setting and correction value into the memory
_SHIFT_ + [ SAVE ]
Press the _SHIFT_ + [SAVE] keys to display the setting/correction value memory saving setting
menu.
SAVE : Setting Current settable
0 to 31 .)Correction -)Both Available ranges
Enter the item to be saved and the memory number, and press the _ENTR_ key, to carry out
saving (overwriting).
After saving, the following confirmation message appears for a short time and measurement screen
comes back.
Save -> 9 Example
 Recalling the setting and correction value saved in memory
_SHIFT_ + [ RECALL ]
Press the _SHIFT_ + [RECALL] keys to display the setting/correction value memory recall setting
menu.
RECALL : Setting Current settable
0 to 31 .)Correction -)Both Available ranges
Enter the item to be recalled and the memory number, and press the _ENTR_ key, to carry out
recalling.
After recalling, the following confirmation message appears for a short time and measurement
screen comes back.
Recall <- 9 Example
It is invalid to recall the setting/correction value memory, which is not being saved.
Recall <- EMPTY