4.7 Changing the Contents Displayed on the Second Line (Auxiliary Display)
4-38 ZM2376
List Steps during multi-measurement
Step: 12 • • • ex.
Even if List is selected, the status appears when the multi-measurement is
disabled.
If a setting is made or the EXIT operation is performed, the measurement screen comes back.
Bin number input menu is as follows.
BIN No:14 Current setting
1 to 14 Available value ranges
To display the upper/lower limit values of primary parameter, set the Bin number.
Perform the EXIT operation to return to one-previous menu.
After setting, measurement screen comes back.
To Next Page
Loading...
