NF ZM2376 - Checking before Use

2.1 Checking Before Use
2-2 ZM2376
2.1 Checking Before Use
 Safety check
To ensure the safety, refer to “Safety Precautions” described in the beginning of this instruction
manual before using ZM2376.
Before turning the power on, read “2.3 Grounding and Power Supply Connection” and observe
the necessary cautions.
 Unpacking
Check that the instrument has not been damaged during transit.
After unpacking, refer to “Table 2-1 Package contents” to check the contents.
Table 2-1 Package contents
！
WARNING
This instrument contains high-voltage parts. Never remove the cover.
The internal parts of this instrument must only be serviced by an engineer who
has a thorough understanding of risk prevention.
ZM2376 Main Unit ························································· 1
Instruction Manual (Basics) ··············································· 1
CD-ROM (see the next page for the contents) ··························· 1
Power Cord Set (3 Pole, 2 m) ············································· 1