7.1 Specification
7-7 ZM2376
• A (upper row): Basic coefficient[%]
• B (lower row): Proportional coefficient[%]
For the measurement speeds, MED, SLOW, and VSLO, the coefficient is as shown in the table
below.
For the measurement speeds, RAP and FAST, the coefficient is 1.1 times of the value shown
below.
The measurement accuracy is not guaranteed for "---".
The basic coefficient A of the 100Ω range is increased 1.5 times, when the output impedance is
25Ω or 6Ω below 1MHz.