Nikon D3100 VBA28001 - Page 119

VBA28001-R.3813.A
- A60 ・ D3100 -
Necessary inspection and adjustment of camara body (except imaging) when parts are replaced
Writing
of initial
value
Insp. for
AE CCD
positioning
Insp.
& adj.
for AE
accuracy
Insp. &
adj. for
aperture
accuracy
Adj. of
voltage
of battery
check
function
Insp. &
adj. of
built-
in SB
ashlight
qty
Insp.
& adj.
for AF
accuracy
Shutter curtain
unit
○
TOGO PCB unit
○ △ ○ ○ ○ ○ ○
Power drive PCB
AF sensor unit
○
Top cover unit or
SB lower case
unit
○
SZ-DC/DC PCB
unit
Prism box unit
△ ○
SQ PCB unit
○
MG PCB unit
○
Front body unit
△ ○ ○ ○
（
○: Adj.
△△
: Insp. only
）
・
When the TOGO PCB unit has been replaced, be sure to update the Firmware of MAIN/RISC and
the compensation data on lens distortion before writing the initial values. However, the initial values
for imaging will be written automatically.
・
During the inspections and adjustments, do NOT touch the discharging areas and condenser.
User ID:INC