Nikon D3100 VBA28001 - Front Body Disassembly

VBA28001-R.3813.A
- D36 ・ D3100 -
#635
#656
#1020
#656
#B1002
[Purple] x2
[Black]
[Red]
Disconnect the FPC.
Take out the two screws (#635) and two screws (#656).
Remove the sub-frame unit. (When this is removed, be careful not to get caught by a wire of the
condenser.
）
Disconnect the connection-FPC (#1020).
•
•
•
•
SZ-DC/DC PCB unit
Take out the two screws (#656).
Remove the SZ-DC/DC PCB unit (#B1002).
Remove the four wires.
•
•
•
Be careful not to get
caught by a wire of
the condenser.
User ID:INC