Nikon D3100 VBA28001 - AE;AF Accuracy and Positioning

VBA28001-R.3813.A
- A38 ・ D3100 -
#631
#24
#B151
Note: As for this product, make only the inspection for the AE-CCD positioning.
Caution: If the secondary rechargeable battery of the TOGO PCB has no capacity left, it may be
impossible to communicate with the PC. In this case, mount the top cover and rear cover,
and then set "time zone" and "date and time" on the menu.
Mount the front cover (#24), and tighten the three screws (#631) (for temporary assembly).
Mount the battery cover unit (#B151).
Refer to "Inspection and adjustment for AE-CCD positioning" of ADJUSTMENT Separate Volume
②
for details.
•
•
•
Inspection for AE-CCD positioning
Tool (Device)
J15428 J63070 J18267 J15443 J15444 Use Nikon products.
AE/CCD use
chart board
Color viewer LENS
AF50/1.4D
TWO-WAY
level
TWO-WAY
focusing rail
Power connector EP-5A
User ID:INC