Nikon D80 VBA14001 - DG Shield Plate; DG-PCB Unit

- Ｄ  ･ -
Q0340グラフィック用ロゴ
060411デザイン部伊藤
VBA14001-R.3694.A
・
Remove the three FPCs, two harnesses, and four solderings.
・
Take out the screw (#683) and remove the DG-PCB unit (#B1031).
・
Take out six screws (#683).
・
Remove DG shield plate (#B78).
#683×6
#683
#B1031
Harness
Harness
#B78
DG shield plate
DG-PCB unit
CCD/PCB (core wire: coated)CCD/PCB (core wire: coated)
CCD/PCB (ground) CCD/PCB (ground)