Nikon D80 VBA14001 - Camera Disassembly Procedures; Front and Rear Body Separation

- Ｄ  ･ -
Q0340グラフィック用ロゴ
060411デザイン部伊藤
VBA14001-R.3694.A
Rear cover
・
Take out two screws (#657) and two screws (#656).
・
Remove the rear cover.
Disassembly
1. Separation of Front and Rear Bodies
Bottom Cover
・
Take out two screws (#692), one screw (#658) and four screws (#657).
・
Remove the bottom cover.
#692×2
Bottom cover
#658
#657×4
#657×2
Rear cover
#656×2
Note: Remove the rear cover slowly so as not to cut TFT-PCB
connection-FPC of the upper portion of the cover.